Acqura Systems - Cost effective emulation for Philips 80C51, LPC, LPC900 and MX Microcontrollers

18 May 2013 19:38:25

Latest News

Subscribe to Acqura's Newsletter for information about Philips microcontrollers and smart coding tips.

First Time Visitor
Login
Register
There are 8 Guest users online.

Products
  Emulation Tools
    8xC51 Family
    LPC76x Family
    8xC51MX Family
    LPC900 Family
    Choosing an
    Emulator
  Programmers
  Adapters
  Bondouts/Spares
  Repairs
  Microcontroller Sales

Ordering
  Show My Cart
  Proceed to Checkout

Support
  Downloads
  Forums
  Links and Resources
  Data Sheets
  Technical Notes
  Testimonials
  FAQ
  Common Problems
  Repairs and Returns
  Contacting Us
  About Acqura

Take our Poll

IMPORTANT ANNOUNCEMENT

From 1 January 2011 Acqura Systems will no longer supply Philips microcontroller development products. We would like to thank our customers for their support over the last eight years.

Products

P87LPC769HD SO20

P87LPC769 SO20 Low power, low price, low pin count (20 pin) microcontroller with 4 kbyte OTP

Image not available

This item is subject to a minimum order quantity (MOQ), and the price per device will be lower for higher quantities. The prices for some representative quantities are shown below. If you want to order a different quantity, enter it below and add it to your cart to see the total cost (you can always delete items from your cart later).

PACKAGING. Please note that you will not necessarily receive your goods in standard packaging, even if you have ordered a quantity equal to, or more than a standard tube quantity. We may break down standard tube lengths into smaller lengths for more efficient shipment.

Devices in surface-mounted packages may be sensitive to absorbed moisture. Such devices supplied in smaller quantities without the manufacturers original moisture-controlled bulk packaging, should be 'baked out' according to the manufacturers recommendations before being subjected to reflow soldering processes. Such devices can however generally be manually soldered without special precautions.


Related Products	None
PDF	Datasheet not available
MOQ	5 devices
Cost (5 devices)	US $12.03
Cost (10 devices)	US $8.90
Cost (20 devices)	US $7.27
Cost (50 devices)	US $6.20
Cost (100 devices)	US $5.76
Cost (1000 devices)	US $5.06
Quantity Required

The P87LPC769 is a 20-pin single-chip microcontroller designed for low pin count applications demanding high-integration, low cost solutions over a wide range of performance requirements. A member of the Philips low pin count family, the P87LPC769 offers programmable oscillator configurations for high and low speed crystals or RC operation, wide operating voltage range, programmable port output configurations, selectable Schmitt trigger inputs, LED drive outputs, and a built-in watchdog timer. The P87LPC769 is based on an accelerated 80C51 processor architecture that executes instructions at twice the rate of standard 80C51 devices.

Features
-An accelerated 80C51 CPU provides instruction cycle times of 300-600 ns for all instructions except multiply and divide when executing at 20 MHz. Execution at up to 20 MHz when VDD= 4.5 V to 5.5 V
-Four-channel multiplexed 8-bit A/D converter. Conversion time of 9.3 uS at fosc= 20 MHz.
-Two Digital to Analog Converter (DAC) outputs. (One D/A output shared with the A/D).
-4 Kbytes EPROM code memory.
-128 byte RAM data memory.
-32-byte customer code EPROM allows serialization of devices, storage of setup parameters, etc.
-Two 16-bit counter/timers. Each timer may be configured to toggle a port output upon timer overflow.
-Two analog comparators.
-Full duplex UART.
-I²C communication port.
-Eight keypad interrupt inputs, plus two additional external interrupt inputs.
-Four interrupt priority levels.
-Watchdog timer with separate on-chip oscillator, requiring no external components. The watchdog timeout time is selectable from 8 values.
-Active low reset. On-chip power-on reset allows operation with no external reset components.
-Low voltage reset to allow a graceful system shutdown when power fails. May optionally be configured as an interrupt.
-Oscillator Fail Detect. The watchdog timer has a separate fully on-chip oscillator, allowing it to perform an oscillator fail detect function.
-Configurable on-chip oscillator with frequency range and RC oscillator options (selected by user programmed EPROM bits). The RC oscillator option allows operation with no external oscillator components.
-Programmable port output configuration options: quasi-bidirectional, open drain, push-pull, input-only.
-Selectable Schmitt trigger port inputs.
-LED drive capability (20 mA) on all port pins.
-Controlled slew rate port outputs to reduce EMI. Outputs have approximately 10 ns minimum ramp times.
-15 I/O pins minimum. Up to 18 I/O pins using on-chip oscillator and reset options.
-Only power and ground connections are required to operate the P87LPC769 when fully on-chip oscillator and reset options are selected.
-Serial EPROM programming allows simple in-circuit production coding. Two EPROM security bits prevent reading of sensitive application programs.
-Idle and Power Down reduced power modes. Improved wakeup from Power Down mode (a low interrupt input starts execution). Typical Power Down current is 1 uA.

Counter