From 1 January 2011 Acqura Systems will no longer supply Philips microcontroller development products. We would like to thank our customers for their support over the last eight years.

	89LPC936 Bondout Replacement P89LPC936 Bondout R1.0 (A) for the PDS900 Emulator Supported Devices P89LPC901, P89LPC902, P89LPC903, P89LPC904, P89LPC906, P89LPC907, P89LPC908, P89LPC920, P89LPC921, P89LPC922, P89LPC930, P89LPC931, P89LPC932, P89LPC933, P89LPC934, P89LPC935, P89LPC936 Related Products PDS900, 89LPC938 Bondout Show all related products PDF Datasheet not available Cost US $35.00 Quantity Required Replacement or upgrade 89LPC936 bondout for PDS900 emulation system.  Note Earlier PDS900 emulation systems were released before the P89LPC936 was released and were fitted either with the P89LPC932 bondout or the P89LPC935 bondout.  If you need to replace the bondout in your PDS900 emulator we recommended that the P89LPC936 bondout be fitted rather than the 89LPC932 Bondout. Any order that includes PLCC package replacement bondouts is shipped with a PLCC extraction tool. Click here for a comprehensive selection guide showing which emulation and programming system and associated emulation and programming adaptors you will require for all of the LPC900 family devices. Note that limitations apply when using PDS900 to emulate some devices in the P89LPC900 family. See Why can't I get P1.2 into quasi I/O or push-pull output mode? for more iniormation.